Timber Pro UV brings you the durability and professional results you've been looking for. This easy-to-apply, easy-to-cleanup, and easy-to-maintain formula has such unique qualities it is unlike any other coating on the market!

Timber Pro UV is available in clear and semi-transparent natural wood tone colors. This smooth blend of natural oil resins and state-of-the-art additives uses pure water as a carrier instead of flammable, toxic solvents.

Wood Coatings

Timber Pro Wood Finishes are manufactured in Vancouver B.C. Canada. This speciality finish is reputed to be one of the best natural wood finishes in the industry. Our products are used by several top log home companies, government agencies, custom cedar home dealers and wood manufacturers who are "in the know" when it comes to the proper way of maintaining and protecting natural wood siding and decking. The formula is quite unique and difficult to classify because it does not fit neatly into either the "oil base" category or the "water base" category. The following qualities best describe what makes Timber Pro so special.

Oil Resin Based, Water Borne - Natural plant derived oils can be modified into resin. Resin is the toughest and most expensive ingredient in any wood finish. There are different grades and qualities of resin. Many wood stains contain a small percentage of resin, be it an oil resin or an acrylic/latex type resin. Timber Pro is made exclusively from 100% oil resin of the very highest grade and is not diluted with other solids that are not as durable as resin. Our top grade oil resin is specifically designed to bleed deep into the wood and is carried into the wood via water. You have the beauty and durability of an oil/resin base with the environmental safety of a water carrier.

Easy to Maintain - Consumers are so concerned with "how much does it cost and how long does it last?" that they often forget to ask, "How easy is it to maintain?" Many wood stains build up a film on the surface that should be stripped before it is reapplied. Stripping is a difficult and costly job. Timbers Pro does not build a gummy film over time and does not crack chip or peel. Simply lightly powerwash and reapply only the clear coat over the years to keep the original semitransparent coats fresh and protected. This eliminates the "painted look" that often shows up years later with products that do not have a clear topcoat system.

Non-Darkening - Ever notice how some natural wood sided homes and log homes darken in colour as they weather due to the sun continually heating up the oil day after day, darkening the finish with each "re-heat". Soft oil finishes can also be sticky for months, causing dirt, dust, pollen and pollution to attach themselves to the wood. This then feeds mildew accumulation that can blacken the wood. The oil/resin in Timber Pro does not soften and darken with UV and Timber Pro dries without stickiness so dirt and dust will not be attracted to the wood.